This is a demo store. No orders will be fulfilled.
Outdoor access point Airmax 2.4GHz and 8DBi LOCOM2 Ubiquiti
Ubiquit CPE LOCOM2 Outdoor 2.4GHz
Ubiquiti Networks ™ has manufactured a low cost and efficient bandwidth CPE with the original NanoStation ™.
The NanoStation LocoM2 take the same concept for the future with sleek and elegant formats, along with the integrated technology airMAX ™ (MMA TDMA Protocol).
The low cost, high performance and small format of the NanoStation LocoM2 make them extremely versatile and economical to implement.
Together with the installation of the CPE LOCOM2 it is recommended to install an ETH-SP-G2 anti-charge protector
The LOCOM2 access point of Ubiquiti is a CPE that works at 2.4GHz and has a power of 8DBi.
What technical characteristics does the LOCOM2 access point have?
-
NanoStation Loco M2 is a compact outdoor device, it includes a dual polarity MIMO antenna for the 2.4 GHz band.
- The actual transfer speed of the equipment is up to 150 Mbps.
- Thanks to TDMA technology, Time Division Multiplexing allows you to connect more than 300 clients to the team.
- This model has a low latency. Compared to the Nanostation M predecessors, the Nano Loco M2 has a processor with a higher clock frequency of 400 MHz and more memory.
- Very simple and transparent administration website
- Examples of possible configurations:
- AP, client or WDS mode
- Traffic Shaping
- QoS
- Transparent bridge or routing between WAN and LAN, with NAT or without NAT
- Specific LED to indicate the strength of the signal
- Output power 23 dBm
- The equipment supports IPv6 in bridge mode and WDS.
- The equipment includes the 24V PoE injector necessary for its power supply.
- Another advantage is that it supports PoE on the secondary ethernet port, which allows it to power another device. This feature can be disabled through software.
- Important information about compatibility:
- This device uses the new AirOS V firmware version. For this reason, the device may not be fully compatible with other radio devices.
- The AirOS system is continuously improving, so it is recommended to always update the firmware to the latest version.
- Specifications Ubiquiti Loco M2
- Ports and Interfaces
- Ethernet LAN (RJ-45) number of ports: 1
- Weight and measurements
- Width: 80 mm
- Depth: 31 mm
- Height: 163 mm
- Weight: 180 g
- Energy control
- Energy consumption: 5.5 W
- Input voltage: 24
- Input current: 0.5
- Power over Ethernet (PoE): Yes
- Environmental conditions
- Relative humidity range for operation: 5 - 95%
- Operating temperature range: -30 - 75 ° C
- Antenna
- Antenna gain (max): 8 dBi
- Design
- Internal: No
- Color of product: White
- LED indicators: Yes
- Housing material: Plastic
- Performance
- Transfer rate (max): 150 Mbit / s
- 2.4 GHz: Yes
- Network standards: IEEE 802.3, IEEE 802.3u
- Ethernet LAN, data transfer speed: 10,100 Mbit / s
- Wi-Fi data transfer speed (max): 150 Mbit / s
- Band frequency: 2.412-2.462
- Flash Memory: 8 MB
- Internal memory: 32 MB
- Maximum range outdoors: 10000 m
- Built-in processor: Atheros MIPS 24KC 400 MHz
- Certification: RoHS
| EAN | 810354022333 |
|---|---|
| Hight | 0.220 |
| Length | 0.090 |
| Width | 0.100 |
| REDES - System | WIFI5 |
| REDES - SERIE | Punto - Multipunto |
| Color | White |
| Network Equipment | Radio link |
| Ports | 1 |
| Data Speed | Fast Ethernet (10/100Mbps) |
| PoE | Yes |
| Product Brand | Ubiquiti |
| File | Label | Size | Download |
|---|---|---|---|
|
|
Ficha Técnica PUNTO DE ACCESO EXTERIOR AIRMAX 2,4GHZ Y 8DBI LOCOM2 UBIQUITI | Download |
Upsell products
-
Surge protector for outdoor with two passive ports ETH-SP-G2 Ubiquiti€16.53Tax included


