Housing Kit with 2-Wire Plate + 4.3" Monitor + Home Power Supply by EK

Housing Kit with 2-Wire Plate + 4.3" Monitor + EK Home Power Supply

Single-family home kit consisting of an entrance panel, color monitor and power supply. This kit is a non-polarized two-wire video intercom solution. Its exterior panel has a high-quality color camera with a lack of light auto-detection system. It is compatible with an external button. The board includes a Mifare RFID access control, which allows the user access by card or key fob (up to 1000 cards).

The kit has the following elements:

A PE 1BM stainless outer plate. This board has a high quality camera. It has a housing button and a Mifare RFID access control system, and can store up to 1000 cards. Its configuration is very simple: the kit comes with an integrated master card, to add the access keys you just have to pass the master key and it will produce a first reading beep and then emit another beep to indicate that it is in card recording mode. Integrates electronic opening. Possibility of integrating the analog camera via PE 1BM board into the installation. This plate incorporates a visor with an anti-loss screw system for surface installation.

The MON 43V monitor has an integrated high-resolution 4.3” widescreen color screen. It has a hands-free system and opening without the need for prior dialing. With this monitor we can view the outside of the video intercom from the monitor panel without the need for a prior call. It also allows us to adjust the monitor call volume. It has a call button and open button.

Finally, the kit also integrates a PFA 2420 power supply, with a 2-wire BUS system. It provides the necessary current for the system centrally, in addition to serving as an intercom module between the panel and the monitor. This source includes a locking system for short circuit detection in DIN rail installation.

This kit can be expanded to two more exterior panels with the possibility of installing up to 4 monitors identified in the same home.

Its installation is very simple, both the monitor and the board are connected to the power supply. In the attached documentation we leave you the installation manual.