This is a demo store. No orders will be fulfilled.
Fiber4Sat Module. Optical DWDM Transmitter (2 SAT + DTT)
Fiber4Sat module. Optical Transmitter DWDM (2 Satellites + DTT) Televes 237910
Device that receives the satellite signal from 2 optical LNBs and distributes it together with the DTT over a single fiber to the different users with the DWDM (Dense Wavelength Division Multiplexing) transmission technique. You transmit the 2 complete satellites (8 polarities) on the same fiber.
Televes Fiber4Sat modules reach greater distribution distances with higher bandwidth and less signal loss. Up to 64 users. The equipment itself allows the supply of the 2 LNBs.
Format for rack cabinet mounting.
Fiber4Sat module. Optical Transmitter DWDM of 2 Satellites + DTT for 64 users
What are the main characteristics of the Fiber4Sat Televes 237910 Module?
- Two complete satellites + RF (DTT/QAM) over a single fiber
- DWDM based transmission (Dense Wavelength Division Multiplexing)
- Allows the powering of all 2 LNBs using the equipment with Ref. 237910
- Up to 64 users
- 8 Polarities on a single fiber
- Higher distribution distance
- Smaller signal losses
- Higher bandwidth
- Rack mounting
- Easy installation
What technical specifications does the Fiber4Sat Televes 237910 Module have?
| OPTICAL INPUTS | ||
| Inputs number |
2 (SAT) 2 (External) |
|
| Maximum optical power | dBm |
+3 (SAT) +7 (External) |
| Power self-regulation range | dBm | -5...+3 (SAT) |
| Bandwidth |
1100...1650 (SAT) CH31, CH32 (External) |
|
| Optical connectors | type |
SC/APC (SAT) SC/PC (External) |
| OPTICAL OUTPUT | ||
| Outputs number | 1 | |
| Wavelengths at the output connector | nm |
1551.72, 1552.52 (SAT) 1550.12, 1550.92 (External) |
| Output optical connector | type | SC/APC |
| RF INPUT | ||
| Connector | type | F |
| Impedance | Ohm | 75 |
| Bandwidth | MHz | 47...862 |
| Self-controlled input range | dBµV | 75...90 |
| GENERAL | ||
| Voltage | Vac | 110 - 230 |
| Frequency | Hz | 50/60 |
| Maximum input power consumption (when powering 4 LNBs) | mA | 450 |
| Input voltage at F connectors for satellite power supply | Vdc | 12 |
| Maximum current in F connectors for satellite power | mA | 450 |
| Operating temperature | ºC | -5...45 |
| Protection index | PI | 20 |
| EAN | 8424450206119 |
|---|---|
| Hight | 0.000 |
| Length | 0.000 |
| Width | 0.000 |
| System SAT | Optical Fiber |
| SERIE SAT | Fiber4Sat |
| Color | Black |
| Product Brand | Televes |
Upsell products
-
1310nm optical transmitter SC / APC 10dBm€1,135.83Tax included -
1550nm optical transmitter SC / APC 4dbm€779.07Tax included -
Transmitter TX FO 1550nm (TERR.) / 1310nm (SAT) SC / APC€405.02Tax included -
Optical transmitter 1310nm ''SC/APC'' 10dBM from Televes, Ref. 233306€927.72Tax included -
Optical receiver 1 input with 4 outputs (QUAD FI + TDT)€144.47Tax included -
Optical Transmitter DTT-Satellite 1310nm SC/APC 3dbm€364.54Tax included -
RECEIVER F.O. WEATHER S / RET. + AMPLI RF€704.85Tax included


